Tips and tricksPond construction guide >>>Pond construction set installationSpare parts list
Product finder:
 
Pond construction guide


  Step 1
Determine the size and shape of your pond and mark it out with sand or a hosepipe.


  Step 2
Plan the different pond areas (bog area 20cm, shallow water area 50 cm, and deep water area 70cm).


  Step 3
Dig the hole and shape the different areas.


  Step 4
Remove all stones, roots and other sharp objects, cover with pond fleece or a 10 cm thick layer of sand.


  Step 5
Lay out the liner and spread over the pond area. When you fill the pond with water, the liner gradually begins to shape itself in the pond.


  Step 6
Form the edge of the pond with stone liner and gravel. In time this will create a natural blending with the garden.


  Step 7
Now you can start planting. Use our planting baskets for this.


  Step 8
Now site the technical elements such as pumps, filters and UVC's in their desired location, and switch on.


  Step 9
Site the lighting, by placing lamps both in and out of the water.


  Step 10
Top up the remaining water and site the decorative items.


  Step 11
All set!




© 2004-2009 by PfG GmbH · Postfach 2068 · 48469 Hörstel · Germany
We reserve the right to make any alterations and changes without prior notice, to both text and products
All specifications are taken from water surface level, and are maximum values. · Imprint